|
Power Management |
|
|
|
| CM1011bg |
Ultra-Low-Power current bias, ibias=17.5nA, supply voltage range 1.0V - 3.3V, current consumption below 90nA in active mode, enable control |
0.15 μm |
 |
 |
| CM1012bg |
Ultra-Low-Power current bias, ibias=17.5nA, supply voltage range 1.0V - 3.3V, current consumption below 90nA in active mode, automatic start-up as soon as power supply starts |
0.15 μm |
|
 |
| CM1013eh |
Ultra-Low-Power current bias, ibias=12.0nA, supply voltage range 1.0V - 3.3V, current consumption below 50nA in active mode, enable control |
0.13 μm |
 |
|
| CM1111bg |
Ultra-Low-Power LDO voltage regulator, input voltage range 1.2V - 3.6V, current consumption below 2.5μA in active mode including internal voltage reference, short circuit protection |
0.15 μm |
|
|
| CM1112ae |
High-Voltage, Low-Power,Voltage regulator, input voltage range 5.0V - 30.0V, Output load up to 5mA |
0.35 μm |
 |
|
| CM1211bg |
Ultra-Low-Power voltage reference, vref=750mV, supply voltage range 1.0V - 3.3V, current consumption below 400nA in active mode, enable control |
0.15 μm |
|
|
| CM1212bg |
Ultra-Low-Power voltage reference, vref=750mV, supply voltage range 1.0V - 3.3V, current consumption below 400nA in active mode, enable control, automatic start-up as soon as power supply starts |
0.15 μm |
|
|
| CM1213eh |
Ultra-Low-Power voltage reference, vref=750mV, supply voltage range 1.0V - 3.3V, current consumption below 400nA in active mode, enable control |
0.13 μm |
|
|
| CM1311bg |
Ultra-Low-Power PMU, 2 LDOs, built-in POR / oscillator / references 750mV-17.5nA / ADC for input voltage monitor, supply voltage range 1.2V - 3.6V, current consumption below 5μA in active mode |
0.15 μm |
|
|
| CM1412ae |
Power-on Reset / Low-Power / Configurable Threshold from 0.9V to 5.5V / Configurable Hysteresis (Default 100mV)/ Configurable Delays (Default are 2 assertion delays, 1μs and 20μs) |
0.35 μm |
|
|
| CM1511ae |
Low-Power/Low Voltage combo voltage¤t references, vref=1.2V, iref=0.6μA, supply voltage range 1.6V - 3.6V, current consumption below 5μA |
0.35 μm |
|
|
|
Data Converters |
|
|
|
| CM2011bg |
General purpose 10-bit, Successive Approximation ADC, 240kSPS, 8-input multiplexed |
0.15 μm |
|
|
| CM2012bg |
Low-Power 8-bit, Successive Approximation ADC, 50kSPS, current consumption below 30μA in active mode |
0.15 μm |
|
|
| CM2013ae |
General purpose 10-bit, Successive Approximation ADC, 50kSPS, 4-input multiplexed, targeted for use in microcontrollers |
0.35 μm |
|
|
| CM2111bg |
Ultra-Low-Power 8-bit, Time-Based ADC, 50SPS, current consumption below 850nA in active mode, supply voltage range 1.0V - 3.6V |
0.15 μm |
|
|
| CM3011bg |
General purpose 10-bit, Resistive DAC, 2 MSPS |
0.15 μm |
|
|
|
Clock Management |
|
|
|
| CM4011bg |
Ultra-Low-Power Oscillator, F = 100kHz , current consumption of 2nA/kHz, supply voltage range 1.0V - 3.6V |
0.15 μm |
|
|
| CM4012bg |
Ultra-Low-Power Oscillator, F = 4MHz , current consumption below 1μA, supply voltage range 1.0V - 3.6V |
0.15 μm |
|
|
| CM4013ae |
Low-Power Oscillator, F = 12MHz , current consumption below 5μA, supply voltage range 1.6V - 3.6V |
0.35 μm |
|
|
|
Sensors & Actuators |
|
|
|
| CM6011ae |
Capacitive Sensor, 3pF sensibility, 460kHz-600kHz frequency output, targeted for use in microcontrollers |
0.35 μm |
|
|
| CM6111ae |
30V / 20mA Driver/Switch with short circuit protection and over-current detection features embedded |
0.35 μm |
|
|
